Your Civil and Structural Consulting Engineer

Projects

 

We have been doing the structural and geotechnical engineering design for various types of the projects. Our involvement includes from the concepts, to the detail design, drafting and supervision during the construction. These projects are grouped into 7 main groups, i.e.

 

1)                       Residential Tall Buildings and Houses

2)                      Commercial and Government Buildings

3)                      Industrial and Power Plants

4)                      Infrastructures

5)                       Mining Works

6)                       Shop Drawings/BIM: steel structures, post-tensioning and RC

7)                       Foundations and Geotechnical Engineering

 

 

 

Project details

 

Residential Tall Buildings and Houses

 

Redevelopment Contract 11 at Kallang / Whampoa for Housing Development Board of Singapore

Development of 8 Townhouses at 9 Cornelius Street Clontarf, Qld

Single Storey House Development Lot 206 Lakeview Tce Murrumba Downs Qld 4503

Development of 3 Storey Apartment for 11 Units at 1 Cowen Street, Margate, Qld 4019

Development of the Double Story House at 251 Lister Street, Sunnybank, Qld 4109

 

Back to top

 

 

Commercial and Government Buildings

 

The 16-storey Office Extension Building With 2 Basement Carpark (phase II) And Conversion of 4th & 5th Storey Office to Carparks at the Existing 10-storey URA building, Singapore

SunTec City Office Tower 3 and 4, Singapore

Proposed warehouse & Office Development, Darwin, Lot 5396, NT

Synergy Building: post-tensioned flat slab

 

Back to top

 

 

Industrial and Power Plants

 

800MW bituminous coal fired power station extension, German

 

Back to top

 

 

Infrastructures

 

Undersea tunnel at Tuas, Singapore: 2,300m long

Control Tower: Constructed on ground and lifted up

Hanger 2 Changi International Airport: 80mx120m in plan

Landing bridges of Changi International Airport, 36 off

Hangar 4 and 5 of Changi International Airport: 40m x 40m in plan

 

Back to top

 

 

Mining Works

 

Alumina silos & reclaiming system for alumina silo 775-4 for Rio Tinto Gove Refinery Plant

Structural assessment and repair engineering for Alumina furnace, WA

Gold mining project in Eastern Guizhou Province, China: 1.2 Mtpa Gold Refractory

Analysis of the tunnel under additional heavy load / surcharge: conveyor tunnel at primary crusher station, Cape Lambert, WA

Design wall mounted attachment points for pulling external trunnions into place, Yandi, WA

Structural design check for actuated gate and supporting beams

Structural inspection and repair recommendation for conveyor structures at Gove Plant, NT

Structural assessment, repair and strengthening recommendation for Stockpile building, 250m long x 50m wide x 25m high, Northern Qld

 

Back to top

 

 

Shop Drawings/BIM: steel structures, post-tensioning and RC

 

XTRATA LION PHASE 2- Mill Building, Furnace Building (more than 6000 tonne structural steel, below right) and warehouse building, South Africa (2011-2012)

Hitachi Medupi Power Station Boiler Structure, South Africa, heavy steel structural plant (2010- 2011): total cost R100 Billion

Alstom 800MW Boiler Building at Westfalen, Germany, heavy steel structural plant (2008-2010.06): part of € 2 billion investment

Post-tensioned concrete flat slab, general slabs and beams

 

Back to top

 

 

Foundations and Geotechnical Engineering

 

Singapore Exchange Centre:14m deep excavation in thick soft marine clay

Police Cantonment Complex, 391 New Bridge Road, Singapore

Foundation for Sengkang-Punggol Light-Rapid-Transit (LRT) line, Singapore

Redevelopment of Foo Hai Chan Monastery, Singapore

New tailings dam for mining waste disposal, China

Design for high-steep cut soil slopes in Tehran-Chalus highway construction, Iran

Dynamic landslide control for open-pit mining, China

 

Back to top